carscannerproduct: ford vcm

2015年11月29日星期日

Ford VCM IDS At Newest Version & Full Functions

Ford VCM is at high quality and professional for Ford, Lincoln, Mecury, Mazda, Jaguar, Land Rover diagnose and program. Full function characteristic and timely updating are helping it come to more and more technicians.

Newest version:

Ford IDS: V86

Jaguar & Land Rover: V135

Please Note:

The Ford VCM IDS and JLR can be installed in the same laptop or PC.

But you must install them in different driver as the following same steps.

Different Driver and same steps as the following, please pay attention to it!

Install Steps:

1. You must install JLR V135 first ( It can be installed in C: ).

2. Install DIS V86 in different Driver after install JLR V135 successfully, like D: or E:.

3. After install both softwares, please don't hurry to run them.

You must install the V135 and V86 crack files before you run them.

After install both crack files, restart the laptop or pc, then you can run DIS V86 and JLR V135.

If you install them in different laptops, no need to follow these steps.

More related topics

Audi A8L 40TFSI maybe with 2.0T engine

The new Infiniti Q60 is expected to be released next year

AD900 Pro Key Program Tool with 4D Copy Function

2015年8月10日星期一

Audi A6L MMI black screen

An Audi A6L 2.4 (C6) with mileage of about 100,000 km MMI black screen, All about MMI button lights off, and the screen can not be use.

Diagnosis: test fault exists, and no sound, restart the MMI have no response, use VAS 5054A and latest ODIS 2.2.4 software to test, found multimedia module have fault code. Use ODIS inside data inquiry function found that the specific fault as follows:

(1) MOST system fuse damaged;

(2) plus the conversion parts, modified line;

(3) MOST system fiber optic system have fault;

(4) MOST systems some control unit damaged.

Based on the above reasons to fault diagnosis, after check this car without additional equipment, according ELSA check each insurance, no blown fuses. Use VAS 5054A check the system, there is no fault memory, MOST system components communicate properly, but can not normal enter, use guide function loop diagnostics, display the results as normal. But this time back to the vehicle self-diagnosis, all MOST control unit are appears no communication static fault code, because just only J794 have problems will may be cause all components of the whole system no communication, the remaining components malfunction not have this phenomenon, suspect that fault should be J794 failure caused, replace J794, fault is removed.

After replace J1794 then use VAG VAS 5054A to test, found many place have fault code. At this time just need use VAS 5054A cleaning the fault code is OK.