Nitro OBD2 ECU Chip Remap Tuning Box For Diesel Benzine Car
is a plug & driver performance promote tool will according to your driving
habit to increase the performance of engine. Easy to use, just plug it into the
OBD2 connector of cars.
1. Up 35% more power and 25% more torque.
2. Easy to use,just plug it in and driver your car.
3. Find out the hidden power of your car, will NOT damage ECU.
4. Plug & Drive Ready device to function the increasing the performance of engine.
Please note: this is for diesel car, and make sure your car must have obd2 connector otherwise this Nitro OBD2 is useless for you.
Installation
and Calibration:
1 - Pull the Car Key out from the ignition.
2 - Find OBD2 connector(*) in your car and Plug in EcoOBD2
3 - Insert the key into the ignition and twist the key to the first stage. (Do not start the car)
4 - Press the reset button for about 5 sec. After releasing the button, just wait for a while about 30-54 sec. (EcoOBD2 will communicate and establish connection with ECU)
5 - Start up the engine.
6 - It will recognize your vehicle and your driving habits, after around 200 km/150 miles driving and thus It will adjust itself to match your car perfectly for more fuel saving.
1 - Pull the Car Key out from the ignition.
2 - Find OBD2 connector(*) in your car and Plug in EcoOBD2
3 - Insert the key into the ignition and twist the key to the first stage. (Do not start the car)
4 - Press the reset button for about 5 sec. After releasing the button, just wait for a while about 30-54 sec. (EcoOBD2 will communicate and establish connection with ECU)
5 - Start up the engine.
6 - It will recognize your vehicle and your driving habits, after around 200 km/150 miles driving and thus It will adjust itself to match your car perfectly for more fuel saving.
More related
topics
没有评论:
发表评论