Nissan Datsun new concept car unveiled end of October

Recently, Nissan Datsun brand announced a new concept car notice diagram, notice diagram shows the design of the car's headlights. It is reported that this concept car will be officially released by the end of October at the opening of the Tokyo Motor Show.

In the notice diagram, we can see this concept car uses a very personalized headlight design, the internal use LED lamp group, below the headlights is circular fog lamps. In addition, the air intake contours of this car will use chrome trim, the interior may be use mesh shape.

In test still can use Nissan Consult 3 to diagnosis all various system. Nissan Consult3 III is a professional obd2 scanner for almost all Nissan car model from different regions including Japan, North America, Europe. Nissan Consult 3 is equipped with various function including simultaneous self-diagnosis of an entire system or data recorder.

Currently, Nissan Datsun brand is still not announced the true identity of the concept car, It is reported that this car is likely to based on CMF-A platform to build, or will draw from Renault Kwid concept car design. More news about this concept car, we will continue to focus.

More related topics

LAUNCH ICARD OBD Code Scanner For Android

DearBornPython Toyota Hino Nissan Diesel Scanner 3 in 1

SUZUKI SDT Suzuki Diagnostic Tool Newest Version

 

Jaguar XJ entertainment system no video output

An engine displacement of 5.0L Jaguar XJ. The car entertainment system to watch TV has audio output but no video output.

Troubleshooting:

1. Check the car, confirm the fault. Convert CD and broadcast audio output as usual, consult GTR no relevant troubleshooting information (the car entertainment system not involve the relevant content of K064K), connect with JLR SDD diagnostic tool to read DTC, in FCDIM has U0191-00: Lostcommunication with the television, fault tracking tip 100%. According DA-VINA 2534 SAE J2534 diagnostic guidelines refresh Existing Module: television Module, the fault persists, refresh Existing Module FCDIM failure remains.

2. According to circuit diagram, check TV Module CJB F68 # 10A fuse normal no fusible phenomenon, measure TV module C4ME33A/1 pin voltage:11.68V, C4ME33A/2 pin grounding point normal, check ground terminal fixed point G4D 172AR without loosening and corrosion phenomenon. Measure FCDIM No. CJBF69 15A fuse normal no fusible phenomenon, measure FCDIM No. C2MC02A/8 pin and C2MC02A/16 pin voltage: 11.68V in normal range. Measure C2MC02A/2 pin Alp and C2MC02A/13 pin grounding point normal. Check the ground terminal fixed point: G2D 185AL no looseness and corrosion. Watch the MOST network cycle normal.

3. Recalling the customer description, before the failure not appear, the customer to shop for navigation inspection, then cut off install the GPS system host power supply, the fault persists. Re-view X351 entertainment system information: TV Module is an audio and video terminal signal output and feedback, and whether to perform actions and receive audio and video signals depend FCDIM front display screen, integrated JLR SDD VCM prompt FCDIM Module fault tracing tips 100%.

Troubleshooting: swap FCDIM with the new car, test, fault ruled out.

More related topics

NISSAN CONSULT 3 III DIAGNOSTIC TOOL

Rotunda Ford IDS VCM In Original Project PCB With Original Chip

Rotunda Ford VCM II IDS Scanner (VCM 2)

Nitro OBD2 ECU Chip Remap Tuning Box For Diesel Benzine Car

Nitro OBD2 ECU Chip Remap Tuning Box For Diesel Benzine Car is a plug & driver performance promote tool will according to your driving habit to increase the performance of engine. Easy to use, just plug it into the OBD2 connector of cars.

Highlights of Nitro OBD2 ECU Chip Remap Tuning Box For Diesel Benzine Car

1. Up 35% more power and 25% more torque.
2. Easy to use,just plug it in and driver your car.
3. Find out the hidden power of your car, will NOT damage ECU.
4. Plug & Drive Ready device to function the increasing the performance of engine.

Please note: this is for diesel car, and make sure your car must have obd2 connector otherwise this Nitro OBD2 is useless for you.

Installation and Calibration:
 1 - Pull the Car Key out from the ignition.
 2 - Find OBD2 connector(*) in your car and Plug in EcoOBD2
 3 - Insert the key into the ignition and twist the key to the first stage. (Do not start the car)
 4 - Press the reset button for about 5 sec. After releasing the button, just wait for a while about 30-54 sec. (EcoOBD2 will communicate and establish connection with ECU)
 5 - Start up the engine.
 6 - It will recognize your vehicle and your driving habits, after around 200 km/150 miles driving and thus It will adjust itself to match your car perfectly for more fuel saving.

More related topics

Fileactivation Delphi CDP R3.2014 Service

Car Voltage Regulator Power Processor for ECU Programming

Latest Delphi DS150E VCI Scanner Plus Car And Truck Cables

Nissan X-Trail Car brake system failure

Mileage only 1500 km of Nissan X-Trail 2.5 sedan. The car often in gear will not go, need refuel can moving forward.

Fault Diagnosis: Test car, fault does exist, but use Consult 3 to diagnostic not found fault code, lifting the car did not drag brake phenomenon. Then by repeated test found that the fault only when hanging the forward gear will appear, especially even step on a few brake failure will all appear, and when the fault appear the brake pedal is  harder than no power. When unplug the ABS plug the fault will disappears, back into the plug, fault appear again.

Will caused by ABS pump failure? But read the data stream, ABS not found abnormal, replace the ABS pump failure still exists, that means the problem should be on the signal of control ABS, but use NISSAN CONSULT 3 III not found fault code, that should be relatively large possibility of machinery. Just think when pulling the plug, ESP / TCS / ABS fault code is appear together, and cause this situation fault code C1145 is exactly related with this control; and the fault appear is after the car installed the floor glue, which are associated with these two is (deceleration G sensor), while it is control the car uphill braking delay. Again read data stream found, deceleration G sensor signal is -0.07, while in the ground should be +0.02.

Remove the center console check and found that the direction of the deceleration G sensor bracket installed backwards and there are significant deformation, adjust the bracket change the deceleration G sensor signal to +0.02 and installed test, troubleshooting.

The failure is due to the bracket not installed well, when the car driving on uneven road or even step on the brake, the deceleration G sensor signal will reach -0.08, and when the ABS monitored deceleration G sensor signal is -0.08 will to uphill braking control, so the fault will appears sometimes.

More related topics

Mercedes-Benz R350 vehicle power system troubleshooting

Toyota Camry hybrid HV2 can not travel

Porsche Cayenne can no longer start after hot car flameout